CO2 Incubators > 

CO2-Incubator INC 246 from Memmert Datasheet: Memmert CO2 Incubators.pdf

Product Description

Heating Concept CO2 Incubator - Standard base model We never economise on essential matters. Even in the attractively priced standard model, the INCO CO2 incubator has unequalled precision and reliability, because cell, tissue and bacteria cultures, as well as micro-organisms growing in vitro, need protection in a controlled and physiologically ideal environment. You can build your own customised model incorporating 7 additional modules in the accessories list.  Ventilation and Control uniform atmosphere and temperature distribution with thanks to the enclosed, non-turbulent ventilation system in the working chamber. adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller integral fault diagnostics on temperature, CO2 and humidity limit control 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day-programme-timer with real time clock, precise minute setting digital display (LED) of all set parameters, such as temperature, weekdays, time, CO2, humidity and set-up values - language to be chosen in setup CO2-supply via sterile filter digital electronic CO2 control with automatic zeroing (infrared measuring system) - range of adjustment 0-10% - resolution 0,1% intrinsic adjustment of altitude above sea level CO2-supply being interrupted upon door opening digital display of set and actual values (LED) of temperature (0,1 °C resolution) and of CO2-concentration (0,1%) integrated humidity limit control (88-97%) with digital display of relative humidity - resolution of display: 0,5%, setting accuracy: 1% programme stored on power failure chip card (STERICard) for sterilisation of working chamber with fixed cycle (4 hrs./160 °C) without removal of sensors and mountings   large-area multi-function heating system with additional door and back heating to avoid condensation incl. works calibration certificate for +37 °C Multiple Overtemperature Proctection with audible and visual alarm in case of over-/undertemperature and over-/under-CO2, open door and empty gas cylinder independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1 additional integral over- and undertemperature monitor "ASF" (Auto-Safety-Function) automatically following the setpoint value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating is switched off in case of overtemperature resolution of display and setting accuracy: 0,1 °C mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature Textured Stainless Steel Casing w x h x d: 790 x 938 x 750 mm fully insulated stainless steel door with double locking and 4-point adjustment inner glass door with opening (8 mm dia.) to take gas samples rear zinc-plated steel Interior w x h x d: 640 x 640 x 600 mm, 246 l easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), hermetically welded 3 perforated stainless steel shelves, full-width; 2 stainless steel water dishes, half-width Temperature Range from +20 °C (however, at least 8 °C above ambient temperature) up to + 50 °C temperature variation in time: < +/-0,1 °C (to DIN 12 880: 2007-05) temperature uniformity in chamber at 37°C: < +/- 0.3 °C (to DIN 12 880: 2007-05) Voltage/ Power Rating 230 V (+/- 10%), 50/60 Hz ca. 2.000 W (during heating)