Memmert Cooled Incubator model ICP 800
0 °C up to +60 °C
w x h x d: 1198 x 1895 x 756 mm
Standard equipment Ventilation and Control - additional air circulation in the interior adjustable in 10% steps through controller
- no drying-out of the load caused by the cooling device due to separation of thermal jacket from interior (e.g. biological samples)
- adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
- energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
- highly efficient automatic defrosting system
- autodiagnostic system with fault indication
- 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
- digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
- integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
- multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
speed of mechanical internal air circulation in 10% steps from 10% to 100% - digital display (LED) of all set parameters, such as temperature, weekdays, time, fan speed, ramp segments and set-up values
- resolution of display for set value and actual value 0,1 °C
- long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
- programme stored on power failure
- parallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentation
- serial interface RS 232 including MEMMERT Software "Celsius 2007" for programming and documentation
- chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
- incl. works calibration certificate for +10 °C and +37 °C
Multiple Overtemperature Protection - with audible and visual alarm
- independently working, digitally adjustable electronic microprocessor overtemperature controller TWW protection class 3.3 maximum value for overtemperature, minimum value for undertemperature
- additional integral over- and undertemperature protection "ASF" (Auto-Safety-Function) automatically following the set value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating is switched off in case of overtemperature, cooling system is switched off in case of undertemperature
- resolution of display and setting accuracy: 0,1 °C
- mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature
Textured Stainless Steel Casing - w x h x d: 1198 x 1895 x 756 mm
- fully insulated stainless steel door with double locking and 4-point adjustment
- inner glass door
- rear zinc-plated steel
Interior - Heating Concept - w x h x d: 1040 x 1200 x 600 mm, 749 l
- easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing
- air jacket heating system for gentle allaround thermostating
- 2 perforated stainless steel shelves, non-tipping
Temperature Range - from 0 °C up to +60 °C (optimum performance of cooling aggregate at an ambient temperature of +16 °C up to +32 °C)
Voltage / Power Rating - 230 V (+/- 10%), 50 Hz
- ca. 1.200 W (during heating)
Temperature Distribution - better than +/-0,3 °C (at 10-37 °C)
Temperature Variation - better than +/-0,1 °C (with time)
|
