Incubators > Memmert Excellent

Incubator Fan Assited IFE800 Datasheet: IFE800_EN.pdf

Product Description

Precision incubator Model IFE 800 Standard equipment Ventilation and Control forced air circulation by 2 quiet air turbines, adjustable in 10% steps via process controller continuous adjustment of pre-heated fresh air admixture vent connection with restrictor flap fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication solid state switching unit 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with: integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours: DELAYED ON HEATING UP HOLD or HOLD set-temperature-dependent with guaranteed holding time COOLING DOWN "Loop" function to repeat profile 1-99 times or endless digital display (LED) of all set parameters, such as temperature, weekdays, time, fan speed, ramp segments and set-up values resolution of display for set value and actual value 0,1 °C long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation incl. works calibration certificate for +37 °C Triple Overtemperature Protection in case of overtemperature due to failure, the heating is switched off at approx. 3 °C above the set temperature (fixed value) independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1 resolution of display and setting accuracy: 0,1 °C mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature Textured Stainless Steel Casing w x h x d: 1190 x 1620 x 750 mm fully insulated stainless steel doors with double locking and 4-point adjustment inner glass doors rear zinc-plated steel mounted on lockable castors Interior - Heating Concept w x h x d: 1040 x 1200 x 600 mm, 749 l easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides 2 stainless steel grids Temperature Range from +30 °C (however, at least 10 °C above ambient) up to +70 °C Voltage / Power Rating 230 V (+/- 10%), 50/60 Hz ca. 2.000 W (during heating) adaption of effective heating power depending on the set temperature